|Place of Origin:||JIANGSU,CHINA|
|Minimum Order Quantity:||1pcs|
|Delivery Time:||7-25 work days|
|Payment Terms:||T/T, Western Union, L/C,|
|Supply Ability:||250000pcs /per month|
|Holding Torque:||4.5Nm||Brake Torque:||5N.m|
|Step Angle(degrees):||1.8 Degree||Current:||6A|
86mm Brake Stepper Motor,
4.5N.m Brake Stepper Motor,
86mm automatic stepper motor
86mm 1.8 degree Stepping Motor nema 34 Brake Stepper Motor With Encoder For packaging machine
Lower heat High Torque
The design of prostepper' motor High torque is mainly attributed to many
selected with new materials gets a lower factors including rare earth magnets,
resistance value when compared with optimized rotors, Stators with maximum
motors of the same thickness and the winding fill and laminatins, all of which are
same torque, this makes a greater degree combined together to realize maximum torque.
of improvement for the thermal prostepper’ high torque stepper motors
conductivity performance of the motor, and noise effectively when the
thus greatly reduces the temperature motor operates, which makes
rise of the motor. prostepper' stepper motors stand
provide 15% to 25% more torque acros
the entire speed than conventiona motors.
Automatic assembly line, improve production efficiency, low cost without human operation, one line down intelligent mechanical automatic assembly
The material is selected from well-known manufacturers at home and abroad. The advantages are light weight, good heat dissipation performance, good thermal conductivity, die-casting, good plasticity, higher elongation than iron, low noise, good motion stability, the disadvantages are high price, low hardness
Stepping motor is a mechanical structure,which does not need be changed by electric brush or Hall sensor,thus reducing the probability and increasing the motor life.Stepping motor life usually determined by the life of the bearing.
Accurate position Control
The angular displacement of the stepping motor can be precise controlled by the number of electrical pulses.Angle accuracy can be controlled within ±0.09°without any feedback devices.
Encoder Specifications Brake Specifications
|Resolution||1000cpr/4000ppr||2500cpr/10000ppr||Brake Type||Holding Brake|
|Type||Incremental encoder||Incremental encoder||Voltage||24VDC±5%|
|Supple Voltage||5VDC±5%||5VDC±5%||Release Time||50ms|
· Green Product
· Military Specifications
· Product Features
· Product Performance
· Prompt Delivery
· Quality Approvals
· Small Orders Accepted
· Brand-name Parts
· Experienced Staff
The winding on this article is a 4 Wire Bipolar.
1.8° Step Angle,The motors are directly compatible with the stepper motor drive boards and also drive either motor (if required) in the half step mode i.e. 0.9° per step resulting in higher resolution, greater performance stability and faster stepping rates. Direction, velocity, acceleration/deceleration can be controlled by a stepper motor controller.,Applying the correct electrical pulse sequence to the windings of the stepper motor results in a 1.8° step angle rotation of the spindle (i.e. 200 steps per revolution). When correctly loaded and driven these motors will produce discrete output steps. The number of steps and speed of rotation are determined by the number of pulses and frequency of the input signal. This provides an ideal method for speed and position control. The motors are directly compatible with stepper motor drive boards.